Updating d link firmware
Also, make sure you use a computer connected to the same router as your device; do not perform this process through a remote connection to your device over the Internet. Go to the mydlink downloads page to download the firmware file for your device, and unzip it to your desktop or a folder on your PC. Run your device’s Setup Wizard and write down the IP Address for your device.(Click here to download the Setup Wizard) Enter this IP Address into your web browser to access your device’s web interface.Step 1: Go to the support downloads page and download the firmware file for your device. Open Internet Explorer, and browse to your device's mydlink URL ( or Step 3: Log in and go to Manual Settings Firmware Upgrade.D-Link offers updates for the software that runs on its network routers which is known as the router’s firmware.Firmware updates can fix bugs, improve stability and sometimes add new features.Here, click on Browse..., select the firmware file you downloaded earlier, then click the Upload button.
Make sure your device is connected to your router with an Ethernet cable for the upgrade process; do not use a wireless connection when upgrading the firmware.
If this is the case you may want to check out the guide below where I walk you through the steps necessary to update your D-Link router’s firmware so that you have the latest and most secure version of the router’s software. Log in to your router by visiting or the address you used when the router was configured. I’ve seen this many times even when new updates were available.
Before you proceed with these instructions, I recommend that you backup your router’s configuration file. The best thing to do is head over to the D-Link website and find your router (see below). When you reach the product page, click the Firmware link on the right. Scroll down the firmware list and find the latest version of the firmware.
Enter admin as the User name, enter the password for your device, and then click OK. Go to MAINTENANCE Firmware Upgrade to go to the Firmware Upgrade page. to select the firmware file you saved and unzipped on your computer in Step 2.
After selecting the firmware file, click Upload to start the upgrade process.
Search for updating d link firmware:
Step 5: Verify the firmware version and refresh the page to view your device.